Threaded Chevron Stitch is a part of the chevron stitch family. This stitch can be used in place of the chevron stitch for the added effect of the thread.
What you will need?
- Any fabric.
- Embroidery hoop, 15cm (6″) (Bigger if you are working on a larger design) ( You can purchase a set of 6 hoops from Amazon for your basic needs.)
- Tapestry needle
- Embroidery thread (You can buy this pack of 36 shades of the DMC embroidery floss.)
How many strands of floss do you need for making the Threaded Chevron Stitch?
You can use all 6 strands of the floss. But if you are working on a finer design, then start with 2 strands of floss and increase the number of strands according to your design. I have used all 6 strands for making this stitch.
Step by Step Pictorial Process of making the Threaded Chevron Stitch
1. Start by working a chevron stitch. Bring the thread up at the center of the chevron stitch. Pass the needle through diagonal stitches of the chevron stitch.
2. You will have to pass the needle alternating between the stitch with one up and one down.
Tips for working the Threaded Chevron Stitch
- You will have to know the chevron stitch to work this stitch.
- You can play with different color combinations for
What is this stitch used for?
- This stitch can be used as a decorative stitch on a number of embroidery designs.
(THIS POST PROBABLY CONTAINS AFFILIATE LINKS. OUR FULL DISCLOSURE POLICY IS REALLY BORING, BUT YOU CAN FIND IT HERE)
- Maidenhair stitch
- Wheatear Stitch
- Fern Stitch
- Cast On Stitch
- Basque Stitch
- Long and Short Stitch
- Trellis Stitch
- Closed Feather Stitch
- satin stitch
- back stitch
Check out the video tutorial below
So until next time,
Pin this image for later reference: