Berwick stitch is part of the blanket stitch family. There is very little difference between the two. You will be almost mistaken one for the other. But if you look closely, you will notice that there is a knot in this stitch. This is also known as the Tailored Blanket Stitch.
What you will need?
- Any fabric.
- Embroidery hoop, 15cm (6″) (Bigger if you are working on a larger design) ( You can purchase a set of 6 hoops from Amazon for your basic needs.)
- Tapestry needle
- Embroidery thread (You can buy this pack of 36 shades of the DMC embroidery floss.)
How many strands of floss do you need for making the Berwick Stitch?
You can use all 6 strands of the floss. But if you are working on a finer design, then start with 2 strands of floss and increase the number of strands according to your design. I have used all 6 strands for making this stitch.
Step by Step Pictorial Process of making the Berwick Stitch
1. Start by bringing the stitch up at point A. Take it in through point B and then out through point C. Now, instead of just looping the thread around like the blanket stitch, wrap it around the needle from right to left, as shown.
2. Pull the thread gently to form a knot at the top. Continue working in a similar fashion for the rest of the pattern.
Tips for working the Berwick Stitch
- Knowing the blanket stitch will help to work this stitch easily.
What is this stitch used for?
- This stitch can be used for many decorative embroidery stitches.
(THIS POST PROBABLY CONTAINS AFFILIATE LINKS. OUR FULL DISCLOSURE POLICY IS REALLY BORING, BUT YOU CAN FIND IT HERE)
- Maidenhair stitch
- Wheatear Stitch
- Fern Stitch
- Cast On Stitch
- Basque Stitch
- Long and Short Stitch
- Trellis Stitch
- Closed Feather Stitch
- satin stitch
- back stitch
Check out the video tutorial below
So until next time,
Pin this image for later reference: